How To Use Citristrip

How To Use Citristrip. I've used another stripped to no avail. Do not use circular or scrubbing motions.

The other way you can apply it is with the aerosol spray can. Citrus strippers such as citristrip have a wax in them to keep the product from drying out after it's applied to the surface. I have found that the longer you can leave the product on your wood, the better it will remove the paint.

Other Than Cured Glues There Is Very Little You Can't Get Off With Citristrip.

Spot check a small area with your scraper. Paint and varnish stripping paste. I have found that the longer you can leave the product on your wood, the better it will remove the paint.

Don't Let It Dry Out.

The other way you can apply it is with the aerosol spray can. One is by applying a thick, liberal coat of the gel over the surface and let it dry for at least a few hours. Mineral spirits is recommended after the stripping solution because it's important to break down those waxes before getting started.

There Are A Few Ways To Apply Citristrip Paint Stripper.

Used citristrip to strip varnish off an old craigslist find. A shelf unit with very intricate legs. I've tried scraping, but the angle makes it nearly impossible.

Can You Pressure Wash Citristrip?

I bought the citristrip aerosol. Gently wipe all surfaces of the wood with the rag, moving slowly and using even strokes, staying with the grain of the wood. When the wood looks clear of all finish, clean the surface of all residue with soft cloths dipped in citristrip® paint stripper after wash.

If The Finish Doesn't Slide Off Completely Then Reapply To The Area And Wait Some More.

Do not use circular or scrubbing motions. Citrus strippers such as citristrip have a wax in them to keep the product from drying out after it's applied to the surface. Citristrip paint & varnish stripping paste, 64 oz.