How To Use A Grease Gun

How To Use A Grease Gun. Pump the gun until grease comes out of the gun opening. When this happens, remove the plug on the grease gun’s.

How To Use Grease Guns from www.supercheapauto.com.au

The first step in using this tool is to ensure that you’re using a cartridge of the right size. Now, direct the gun grease where you want to put the grease. In case you don’t know how to use the grease gun, you will be unable to lubricate the equipment or enhance the performance.

So, Now It's Time To Use The Grease Gun.

To know how to use a grease gun, you must also […] Of these three, the simplest method of calibrating grease guns is by taking a shot of grease and measuring the mass. Before putting the new cartridge, cleaning it from old cartridge will be very helpful.

Sometimes The Grease Gun May Fail To Prime Properly Due To The Air Entrapped In The Pathways.

All grease guns use grease cartridges. How to use a grease gun. Also, we are going to make it easy for you.

Steps On How To Use Grease Gun.

Always clean off the zerk fitting with a rag before putting the grease gun coupler on it or you are pumping contamination into the bearing assembly. Use suction principle to pull up the grease into the barrel by alternatively pushing down the barrel with the plunger and pulling up the plunger into the barrel. Put the nozzle of the gun and the equipment at the same angle, press down, and position the gun on the equipment.

Check Gun Tips And Mobile Equipment For Dirt, Contamination, Or Damage.

Divide by 10 to get the average amount of grease being delivered per stroke. Fill the grease gun with grease. Typically, the use of a grease gun will allow lubricant to be dispensed directly to where it’s needed via a grease fitting, known as a grease nipple.

This Will Remove All The Air Trapped In The Gun, Providing Enhanced Effectiveness.

Once checking is done, you can now use the gun to your machinery parts. Put some pressure on through the hand crank. Then go through it till you touch the rod handle.