How To Use A Zircon Stud Finder
How To Use A Zircon Stud Finder. Make sure you keep the sensing surface flush with the wall at all times to prevent false readings. Standard household walls are 5/8 to 3/4 of an inch drywall with studs spaced every 12,16, or 24 inches.
A zircon onestep electronic stud finder will find the edges and the center of the stud, so you can be certain you’re putting the nail or screw in the right place. Most zircon studsensor™ and multiscanner® stud finders require one brand new alkaline 9v battery (with. Tools you’ll need step one:
Place The Tool On The.
When the stud finder beeps, stop and mark the edge of the stud as indicated. How to use a zircon studsensor stud finder to find wall studs. The device robotically calibrates to the wall’s floor.
Standard Household Walls Are 5/8 To 3/4 Of An Inch Drywall With Studs Spaced Every 12,16, Or 24 Inches.
Turn on the device by pushing the switch to the side. Always anchor nails and screws into the center of the stud. These are the same type of batteries that you use in your smoke detector.
Most Zircon Studsensor™ And Multiscanner® Stud Finders Require One Brand New Alkaline 9V Battery (With.
It works by locating the edge of metal or wood studs through a depth of up to 3/4 inch. Slide the stud finder horizontally across the wall until the lights indicate the location of a stud and mark the point with a pencil. Make sure you never drive a nail into the center of a double stud.
The Tool Automatically Calibrates To The Wall's Surface.
When necessary, change direction and slide the stud finder along the wall until it beeps again to indicate another edge. Other studs will be spaced 16 or 24 inches from this stud. Zircon stud finders are designed to be as effortless as possible.
The Zircon Ss I65 Electronic Stud Scanner Detects The Edges And Center Of Wood And Metal Studs And Alerts You Of Live Ac Wires Helping You Easily Find Studs And Avoid Hazards Studscan Mode Locates The Edges Of Wood Or Metal Studs Up To 0.75 Inches (19 Mm) Deep While Deepscan Mode Locates Targets Up To 1.5 Inches (38 Mm) Deep
Tools you’ll need step one: The zircon studsensor locates the edge of wood and metal studs behind drywall. Mark the area once you have calibrated your zircon stud finder, you’re ready to begin.
0 Response to "How To Use A Zircon Stud Finder"
Posting Komentar