Pocket Hole Jig How To Use
Pocket Hole Jig How To Use. Then you simply align the two pieces to be joined and drive a pocket screw at an angle into the pocket to connect your pieces. Drill your pocket holes to the depth recommended for the thinner board, and use a screw that corresponds to that dimension.
Then you simply align the two pieces to be joined and drive a pocket screw at an angle into the pocket to connect your pieces. For boards that are less than 3 1/2″ wide, use the following drill guides for perfect pocket holes: It holds a special stepped drill bit at a precise angle for you.
The Jig Will Guide The Bit And Do All Of The Work;
It’s easy to make straight holes without any issues missing the mark. Pocket hole screws have threads only on the lower portion, while the upper portion not threaded. It is important to understand how boards have traditionally been connected together in woodworking.
Drill Your Pocket Holes To The Depth Recommended For The Thinner Board, And Use A Screw That Corresponds To That Dimension.
Assembling structural frames and cabinet face frames is a common application. In fact, pocket hole joinery is almost unlimited in its uses. If you break it down to the bare basics, to use pocket holes, you just drill a hole, and drive a screw, and all you need is a pocket hole jig and a drill.
When To Use Pocket Hole Joinery
You clamp the pocket hole jig onto your workpiece and drill angled holes with the special stepped drill bit. Once you drill holes, insert screws, and use the clamps, the bond is immediate. The screws used to attach the joints are very short meaning you don’t need a massive piece.
Then You Simply Align The Two Pieces To Be Joined And Drive A Pocket Screw At An Angle Into The Pocket To Connect Your Pieces.
Many other joinery methods require the use of a table saw, router, some chisels plus lots of patience, practice and test cuts and a bunch of messy glue. This jig does make the entire operation easier especially if this is your first time at diy. The nice thing about pocket hole joinery is that you only have to drill a hole in one board:
Ad Riesenauswahl An Werkzeug Und Baumaterial.
Pull back on the drill as you work to free the guide holes of loose wood chips. This helps the pocket hole screw to pull the joint tight together From this point on it is very versatile.
0 Response to "Pocket Hole Jig How To Use"
Posting Komentar