Steps How To Use Fire Extinguisher

Steps How To Use Fire Extinguisher. Pull the pin, this will break the tamper seal. When it drops to the red.

Step by Step information about, How to use Fire from www.pinterest.com

Get the right type of fire extinguisher. Don’t let your extinguisher go bad: Locate the nearest exit and get ready to.

Fire Extinguishers Come In Different Sizes And Are Rated For Use On Different Fires.

This unlocks the operating lever and allows you to discharge the extinguisher. Remember the p.a.s.s rule you need to keep the acronym p.a.s.s in mind while operating the fire extinguisher. You hope you’ll never have to use a fire extinguisher, but it’s wise to know how just in case.after all, according to the national fire protection association (nfpa), over 1.3 million fires were reported across the country in 2017.

At Least Until You Are Faced With A Real Fire!

There are many different types of extinguishers meant to extinguish various sources of fire. Don't neglect fire extinguisher maintenance: Starting at the recommended distance, sweep the nozzle or hose from side to side until the fire is out.

Once The Safety Pin Is Out, Aim The Nozzle Against The Source Of The Flames.

Aim the nozzle at the base of the fire; Know the dates on your fire extinguishers and replace them as needed. Sweep the nozzle around and back.

To Use A Fire Extinguisher, It Is Important To Understand How It Works And The Types Of Fires It Can Be Used On.

Sweep the nozzle from side to side at the base of the fire. When it drops to the red. The following steps should be followed when responding to incipient stage fire:

Pull The Pin Of The Flame Extinguisher.

The acronym pass is used to describe these four basic steps. Get the right type of fire extinguisher. But you should know that the fire categorizes into different classifications.